Gates Sandblasting Services in Reading

If you are looking for reliable gates sandblasting in Reading, you have come to the right place. At Blastec Shotblasting Services, we offer high-quality abrasive blasting and surface preparation services across Reading and the wider Berkshire area. Whether it is a set of old rusty gates, metal fencing, industrial equipment, or structural steelwork ; we strip it back to bare metal and get it ready for a brand new finish.

We are a locally based, fully insured shotblasting company trusted by homeowners, tradespeople, and businesses throughout Reading, Newbury, Wokingham, and beyond. Our team brings years of hands-on experience to every job, big or small.

Our Gates Sandblasting & Shotblasting Services in Reading

At Blastec Shotblasting Services, we offer a wide range of blasting and surface preparation solutions to meet the needs of both domestic and commercial clients across Reading and Berkshire.

Driveway Gates Sandblasting

Driveway gates are one of the most common gate sandblasting jobs we carry out in Reading. Whether you have a pair of traditional wrought iron driveway gates or modern powder-coated steel entrance gates, years of outdoor exposure leaves them looking worn, rusty, and tired.

Our driveway gate sandblasting service strips everything back to clean bare metal so they can be repainted or powder coated and look as good as new again.

Restoring your driveway gates is nearly always more cost-effective than replacing them, especially with older wrought iron gates that are better quality than most modern alternatives.

Garage Door & Garage Gate Sandblasting

Metal garage doors and up-and-over garage gates are constantly exposed to the elements and are often one of the first things to show rust and paint deterioration on a property.

Our garage gate sandblasting service in Reading removes all rust, old paint, and surface contamination from the metal, giving you a perfectly clean surface ready for a fresh coat.

Whether your garage door is solid steel, has decorative panels, or features traditional ironwork detailing, we have the experience to handle it correctly without causing any damage to the metal.

Garden Gates & Side Gate Sandblasting

Garden gates and side access gates are often overlooked until the rust becomes impossible to ignore.

Our garden gate and side gate sandblasting service in Reading is ideal for homeowners who want to restore these smaller gates without the cost or hassle of replacing them.

We blast them back to clean metal quickly and efficiently — a single garden gate can often be completed in just a couple of hours.

Security Gates & Commercial Entrance Gate Sandblasting

Commercial and industrial properties across Reading rely on security gates and entrance barriers to protect their premises. These gates are usually heavy-duty steel or mild steel and see a lot of use day in, day out. Over time, the original coating wears away and rust takes hold.

Our commercial security gate sandblasting service prepares these gates to the exact surface cleanliness standard required for protective industrial coatings — typically Sa 2.5 or Sa 3 — ensuring the new coating bonds correctly and provides long-lasting protection.

Office & Business Premises Gate Sandblasting

First impressions matter for any business. If the gates at your Reading office or commercial premises are looking rusty, flaky, or simply in poor condition, it reflects badly on your business.

Our office and business gate sandblasting service in Reading gets your entrance gates looking clean, sharp, and professional again.

We can work around your business hours to minimise disruption, and our mobile blasting unit means we come directly to your premises — no need to remove the gates.

Industrial & Factory Gate Sandblasting

Large industrial gates, sliding gates, and factory entrance barriers require a serious, professional approach.

Our team has extensive experience with industrial gate sandblasting across Reading and Berkshire, working to the surface preparation standards required by industrial paint and coating manufacturers.

We handle gates of all sizes — including large sliding gates, bi-fold gates, and heavy steel barriers — with our powerful mobile blasting equipment.

Wrought Iron & Cast Iron Gate Sandblasting

Wrought iron and cast iron gates are built to last — but only if they are properly maintained. Rust is the biggest enemy of older ironwork, and once it gets a hold, it needs to be dealt with thoroughly.

Our wrought iron and cast iron gate sandblasting service in Reading removes every trace of rust and old paint, including from the detailed and decorative sections of the gate that are impossible to clean properly by hand.

We use the right abrasive media and pressure to clean the iron without causing any damage, leaving a perfect surface for painting or a traditional gate finish.

Automated & Electric Gate Sandblasting

Automated gate systems are a significant investment, so keeping them in good condition makes financial sense.

If your electric gates are showing signs of rust or paint failure, our automated gate sandblasting service in Reading can restore the metal framework and gate panels while fully protecting the motors, wiring, and mechanical components.

We always mask and protect all automation parts and fixings before we begin blasting, so your system is completely safe throughout the process.

Why Sandblast Your Gates Instead of Replacing Them?

A lot of people assume that once their gates are heavily rusted or peeling, they need to be replaced. In most cases, that simply is not true. Professional gate sandblasting is almost always a far better option. Here is why:

It costs far less than replacement

New metal gates — especially wrought iron or bespoke steel gates — can be extremely expensive. Sandblasting and recoating your existing gates typically costs a fraction of the price of buying and fitting new ones.

Older gates are often better made

Traditional wrought iron and cast iron gates made decades ago are generally heavier and better quality than what you can buy today. They are worth restoring.

A properly prepared surface lasts years longer

When you paint or powder coat over old rust or flaking paint, the new coating fails quickly. After sandblasting, the new coating bonds directly to clean bare metal and can last many years before needing attention again.

No disruption from new gate installation

Replacing gates involves removing the old ones, fitting new posts or hinges, and all the disruption that comes with it. Sandblasting and recoating your existing gates avoids all of that.

Better for the environment

Restoring your gates rather than replacing them reduces waste and the environmental cost of manufacturing new metalwork.

Get in touch today

Why Choose Blastec Shotblasting Services

We know you have a choice when it comes to gate sandblasting in Reading. Here is why homeowners, businesses, and contractors across Berkshire choose Blastec:

Local Reading-based team— We are right here in the area. We know the local area, we respond quickly, and we take real pride in the work we deliver on our own doorstep.
Specialists in all types of metal gates— From small domestic garden gates to large industrial security gates, we have the equipment and experience to handle any gate sandblasting job in Reading.
Mobile blasting — we come to you— Our mobile sandblasting unit means we can come to your property anywhere in Reading or Berkshire. Your gates stay in place. We bring everything to you.
Fully insured— All of our work is carried out by a fully insured team. You are fully covered throughout.
Transparent, competitive pricing— We give you a clear quote before any work begins. No hidden charges, no surprises.
Free no-obligation quotes— Not sure if it is worth restoring your gates? Contact us and we will give you an honest assessment at no cost.

How Our Gates Sandblasting Process Works in Reading

We keep the process simple from start to finish. Here is exactly what to expect when you book a gate sandblasting job with Blastec Shotblasting Services in Reading:

Step 1

Step 2

We Assess the Gates

Step 3

Surface Inspection & Sign-Off

Step 4

Ready for Repainting or Powder Coating

Case Studies

Before

After

Before

After

Before

After

Before

After

Maintenance Tips:

Keep your gates and barriers looking fresh with these tips from our experts at Gates Sandblasting:

Keep It Clean: Regularly clean the surfaces to stop dirt and grime from building up.
Watch for Rust: Check for any signs of rust or corrosion and fix them right away.
Protective Coatings: Every few years, add protective coatings to keep the surface looking good and strong.

By following these tips, you’ll make your gates and barriers last longer, saving you time and money. Trust Gates Sandblasting to keep your surfaces in great shape for many years.

Frequently Asked Questions – Gates Sandblasting in Reading

How much does gates sandblasting cost in Reading?

The cost depends on the size and type of your gates, how much rust or old coating needs to be removed, and whether we carry out the work on-site at your Reading property or at our workshop. A standard pair of domestic driveway gates is very affordable to sandblast. Larger commercial or industrial gates will cost more but are still typically a fraction of the cost of replacement. We always provide a free quote before any work begins.

Do my gates need to be removed before sandblasting?

Not necessarily. Our mobile sandblasting unit allows us to blast gates in place at your Reading property without removing them. This is particularly useful for large, heavy, or automated gates where removal would be difficult or expensive. For smaller gates that can be easily unhinged, bringing them to our Reading workshop is also an option.

Can you sandblast automated or electric gates safely?

Yes. We have experience working on automated gate systems and always take great care to fully mask and protect all motors, wiring, hinges, locking mechanisms, and other components before blasting begins. The blasting is carried out only on the metal surfaces of the gate itself — your automation system remains completely protected throughout.

How long does gate sandblasting take?

A standard pair of driveway gates can usually be sandblasted in two to four hours. Larger gates, heavily rusted ironwork, or complex designs with a lot of decorative detail may take longer. Commercial and industrial gate projects are assessed individually. We will always give you a realistic timeframe when we quote for the job.

What finish can I apply after sandblasting my gates?

After sandblasting, your gates are bare, clean metal and can accept a wide range of finishes — including hand-applied metal paint, spray primer, professional powder coating, or hot-dip galvanising. We can advise on the most suitable option for your gate type and how it is used. For domestic driveway gates in Reading, powder coating is a popular choice as it provides a durable, long-lasting finish that handles outdoor weather well.

My gates are heavily rusted — is sandblasting still possible?

In most cases, yes. Sandblasting is specifically designed to deal with heavy rust and corrosion — it is one of the most effective methods available for exactly this situation. Even gates with significant rust build-up can usually be successfully sandblasted back to clean metal. The only exception is if the rust has caused structural damage to the metal itself — thinning the walls of the tubes or sections to the point where the integrity of the gate is compromised. We will always inspect and advise you honestly before we proceed.

Get a Free Quote for Gates Sandblasting in Reading – Contact Blastec Today

Whether you have a set of rusty driveway gates at home, corroded security gates at your business, or a full site of industrial entrance gates that need stripping and recoating — Blastec Shotblasting Services in Reading has the experience, the equipment, and the team to get the job done properly